Content: DADO SET
8β TO 12β
1/8β TO 13/16β GROOVE
ATB AND FT GRIND
Dadoβs(cross-grain cuts) and grooves(cuts with the grain) are cut efficiently on the table saw with a dado stack set.Unlike a βwobble.β a stack set produces a flat-bottom cut with chip-free edges.
A-ONE makes dado stack sets for every machine and every type of woodworking material.The standard width capacity ranges from 1/8β to 13/16β.The standard set,regardless of diameter or tooth count,consists of two outside saw blades and five inside chippers.The outside blades feature hollow-ground plates for proper clearance,and alternate top bevel (ATB)grind with every sixth tooth flat ground (FT).See charts below for additional components.
D |
NookAngle |
Teeth |
Tool No |
Grind |
Kerf Range |
Bore |
lnch |
mm |
6 |
150 |
+15Β° |
18 |
SS86401 |
ATB/FT |
1/8β-13/16β |
5/8β |
8 |
200 |
-5Β° |
24 |
SS220T643 |
ATB/FT |
1/4β-29/32β |
5/8β |
10 |
250 |
+15Β° |
24 |
SS10721 |
ATB/FT |
1/8β-13/16β |
1β |
12 |
300 |
+15Β° |
24 |
SS12841-30 |
ATB/FT |
1/8β-13/16β |
1β | |